Loko GPS Tracker Firmware Updates & Downloads
Download the latest firmware for your Loko GPS tracker. Free updates for LoRa P2P and LoRaWAN modes. We recommend keeping your devices on the latest firmware. Contact us anytime for support.
To Upgrade Loko Air Firmware
Loko Air Firmware Upgrade Tutorial
1
Download Loko Air firmware
Download
2
Download STMCubeProgrammer
Download
3
Open STM32CubeProgrammer
4
Connect Loko Air to PC via USB
5
On right side select UART
6
Select correct port on USB devices
7
Parity select "None"
8
Hit "Connect" button and wait to read Loko binary
9
Once it is connected to Loko microcontroller, hit "Erasing & Programming" section on left side bar
10
Only check "Run after programming"
11
Select file path of the new firmware
12
Hit "Start Programming"
13
Wait until upload is complete
14
Unplug the Loko Air unit, then turn off and on again to reset the device
15
Ready to use
To Upgrade Loko Ground Firmware
Loko Ground Firmware Upgrade Tutorial
1
Install Thonny IDE
Download
2
Download firmware
Download
3
Connect Loko Ground Unit to PC via USB
4
Turn on Ground unit by pressing button on device
5
Open Thonny IDE
Important Note:
For any issues or suggestions regarding firmware updates, please contact our support team. We are here to help our customers anytime.